Package: afio Version: 2.4.2-2bo3.1 Priority: optional Section: utils Maintainer: Dirk Eddelbuettel Depends: libc5 (>= 5.4.0-0) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/afio_2.4.2-2bo3.1.deb Size: 43432 MD5sum: d11496a033719af051cea4a626e2e114 Description: Archive file manipulation program. Afio manipulates groups of files, copying them within or between filesystems and an afio archive. . Afio archives are portable as they contain only ASCII-formatted header information. Afio makes cpio-format archives. Afio deals somewhat gracefully with input data corruption. Afio supports multi-volume archives during interactive operation. Afio can make compressed archives that are much safer than compressed tar or cpio archives. . Afio is best used as an `archive engine' in a backup script. installed-size: 81 Package: amanda-client Version: 2.4.0.980319-0bo1.1 Priority: optional Section: utils Maintainer: Bdale Garbee Depends: amanda-client, amanda-common, libc5 (>= 5.4.0-0), libreadline2 (>= 2.1), ncurses3.0 Suggests: awk, gnuplot Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/amanda-client_2.4.0.980319-0bo1.1.deb Size: 96354 MD5sum: 1f4e350f34f1873de5dcdee5bfae418f Description: Advanced Maryland Automatic Network Disk Archiver (Client) Amanda is a backup system designed to archive many computers on a network to a single large-capacity tape drive. This package is suitable for large amounts of data to backup. For smaller solutions take a look at afbackup, tob, taper, ... . Features: * will back up multiple machines in parallel to a holding disk, blasting finished dumps one by one to tape as fast as we can write files to tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host with a large holding disk can be filled by Amanda in under 4 hours. * built on top of standard backup software: Unix dump/restore, and later GNU Tar and others. * does simple tape management: will not overwrite the wrong tape. * supports tape changers via a generic interface. Easily customizable to any type of tape carousel, robot, or stacker that can be controlled via the unix command line. * for a restore, tells you what tapes you need, and finds the proper backup image on the tape for you. * recovers gracefully from errors, including down or hung machines. * reports results, including all errors in detail, in email to operators. * will dynamically adjust backup schedule to keep within constraints: no more juggling by hand when adding disks and computers to network. * includes a pre-run checker program, that conducts sanity checks on both the tape server host and all the client hosts (in parallel), and will send an e-mail report of any problems that could cause the backups to fail. * can compress dumps before sending or after sending over the net, with either compress or gzip. * can optionally syncronize with external backups, for those large timesharing computers where you want to do full dumps when the system is down in single-user mode (since BSD dump is not reliable on active filesystems): Amanda will still do your daily dumps. * lots of other options; Amanda is very configurable. . THIS PACKAGE RELIES ON A RUNNING AMANDA SERVER IN YOUR NETWORK. . For a quick start read the README.client.debian in /usr/doc/amanda-client. . Explanation of suggested programs: - awk and gnuplot are needed for plotting statistics of backups installed-size: 201 source: amanda Package: amanda-common Version: 2.4.0.980319-0bo1.1 Priority: optional Section: utils Maintainer: Bdale Garbee Depends: netbase (>=3.03), tar (>=1.12) Suggests: amanda-server (= 2.4.0.980319-0bo1.1) | amanda-client (= 2.4.0.980319-0bo1.1) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/amanda-common_2.4.0.980319-0bo1.1.deb Size: 119726 MD5sum: c05929ff9aae8e6a5acdd4719f87f85e Description: Advanced Maryland Automatic Network Disk Archiver (Libs) This package contains libraries required by the amanda client and server packages. installed-size: 249 source: amanda Package: amanda-server Version: 2.4.0.980319-0bo1.1 Priority: optional Section: utils Maintainer: Bdale Garbee Depends: amanda-common, amanda-server, libc5 (>= 5.4.0-0), libreadline2 (>= 2.1), ncurses3.0 Suggests: perl, awk, gnuplot, amanda-client (>= 2.4.0.980319-0bo1.1) Conflicts: amanda Replaces: amanda Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/amanda-server_2.4.0.980319-0bo1.1.deb Size: 193392 MD5sum: 75c4f203f2ef80ec654b585f2c945e91 Description: Advanced Maryland Automatic Network Disk Archiver (Server) Amanda is a backup system designed to archive many computers on a network to a single large-capacity tape drive. This package is suitable for large amounts of data to backup. For smaller solutions take a look at afbackup, tob, taper, ... . Features: * will back up multiple machines in parallel to a holding disk, blasting finished dumps one by one to tape as fast as we can write files to tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host with a large holding disk can be filled by Amanda in under 4 hours. * built on top of standard backup software: Unix dump/restore, and later GNU Tar and others. * does simple tape management: will not overwrite the wrong tape. * supports tape changers via a generic interface. Easily customizable to any type of tape carousel, robot, or stacker that can be controlled via the unix command line. * for a restore, tells you what tapes you need, and finds the proper backup image on the tape for you. * recovers gracefully from errors, including down or hung machines. * reports results, including all errors in detail, in email to operators. * will dynamically adjust backup schedule to keep within constraints: no more juggling by hand when adding disks and computers to network. * includes a pre-run checker program, that conducts sanity checks on both the tape server host and all the client hosts (in parallel), and will send an e-mail report of any problems that could cause the backups to fail. * can compress dumps before sending or after sending over the net, with either compress or gzip. * can optionally syncronize with external backups, for those large timesharing computers where you want to do full dumps when the system is down in single-user mode (since BSD dump is not reliable on active filesystems): Amanda will still do your daily dumps. * lots of other options; Amanda is very configurable. . For a quick start read the README.server.debian in /usr/doc/amanda. . Explanation of suggested programs: - perl is needed for some non essential server utilities - awk and gnuplot are needed for plotting statistics of backups - to backup the tape server, you need to install the client too installed-size: 501 source: amanda Package: apcalc Version: 2.10.3t5.45-0bo2 Maintainer: Martin Buck Depends: libc5 (>= 5.4.0-0) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/apcalc_2.10.3t5.45-0bo2.deb Size: 810818 MD5sum: 96808a13b8eaf80c0df4d5d38f4de9fa Description: Arbitrary precision calculator (original name: calc) Calc is an arbitrary precision arithmetic system that uses a C-like language. Calc is useful as a calculator, an algorithm prototyper and as a mathematical research tool. More importantly, calc provides one with a machine independent means of computation. Calc comes with a rich set of builtin mathematical and programmatic functions. . Calc is built on top of the library libcalc that represents numeric values as fractions reduced to their lowest terms. This library can also be used to add arbitrary precision capabilities to your own programs and is available in the Debian package `apcalc-dev'. . The original name of this package is `calc', but it had to be changed to `apcalc' for Debian, because there's already another package called `calc' in Debian. Nevertheless, the binary and manpage installed by this package are still named `calc'. installed-size: 2444 Package: apcalc-dev Version: 2.10.3t5.45-0bo2 Maintainer: Martin Buck Depends: libc5-dev Suggests: apcalc Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/apcalc-dev_2.10.3t5.45-0bo2.deb Size: 358142 MD5sum: 47eb16e1ae771bfb6ecc216824da92b2 Description: Library for arbitrary precision arithmetic This package contains the library libcalc.a and the necessary header files which provide routines to handle arbitrary precision arithmetic with integers, rational numbers, or complex numbers. There are also many numeric functions such as factorial and gcd, along with some transcendental functions such as sin and exp. . This library is also used by the commandline calculator `calc', which is provided in the Debian package `apcalc'. installed-size: 981 source: apcalc Package: bash Version: 2.01-0bo5.3 Priority: required Section: base Essential: yes Maintainer: Guy Maor Pre-Depends: ldso (>= 1.8.0-0), libc5 (>= 5.4.0-0), libreadline2 (>= 2.1-2bo4), ncurses3.0, libreadline2 (>=2.1-2bo4) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/bash_2.01-0bo5.3.deb Size: 431932 MD5sum: a160109d28a84d7fbf9d4e3c1209a269 Description: The GNU Bourne Again SHell Bash is an sh-compatible command language interpreter that executes commands read from the standard input or from a file. Bash also incorporates useful features from the Korn and C shells (ksh and csh). . Bash is ultimately intended to be a conformant implementation of the IEEE Posix Shell and Tools specification (IEEE Working Group 1003.2). installed-size: 681 Package: bash-builtins Version: 2.01-0bo5.3 Priority: optional Section: utils Maintainer: Guy Maor Depends: bash (>=2.01) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/bash-builtins_2.01-0bo5.3.deb Size: 77488 MD5sum: 4a55ad45c06f5a60a49290bf6f2b5e7d Description: Bash loadable builtins - headers & examples Bash 2 can dynamically load new builtin commands. Included are the necessary headers to compile your own builtins and lots of examples. installed-size: 245 source: bash Package: bind Version: 8.1.2-0.bo1 Priority: extra Section: net Maintainer: Johnie Ingram Depends: libc5 (>= 5.4.0-0), netbase Recommends: dnsutils Suggests: bind-doc Replaces: netstd (<<2.00) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/bind_8.1.2-0.bo1.deb Size: 347430 MD5sum: 6bdf59635366a47ea1bd81c3032352e6 Description: An Internet domain name server The Berkeley Internet Name Domain (BIND) implements an Internet name server for Unix operating systems. The BIND consists of a server (or `daemon') called `named' and a resolver library. A name server is a network service that enables clients to name resources or objects and share this information with other objects in the network. This in effect is a distributed data base system for objects in a computer network. The BIND server runs in the background, servicing queries on a well known network port. installed-size: 938 Package: bitchx Version: 0.74p2-4bo1.1 Priority: optional Section: net Maintainer: Johnie Ingram Depends: ldso (>= 1.8.0-0), libc5 (>= 5.4.0-0), ncurses3.0 Provides: irc, bitchx-bin, bitchx-doc, bitchx-lib Replaces: bitchx-bin, bitchx-doc, bitchx-lib Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/bitchx_0.74p2-4bo1.1.deb Size: 724372 MD5sum: 58373e1215cf1ad83892098128f6351d Description: Advanced Internet Relay Chat client This is the bleeding edge of IRC software -- the most common functions normally done by scripts are coded into the client itself. It contains dozens of features such as: . * Built-in ANSI color (this is probably the biggest feature) * Ease of use -- dozens of useful command aliases to reduce typing * Built-in notify, protection, and bot lists * Built-in mass commands and tools * Extended set of DCC commands and built-in CDCC offering * Extended scripting functionality, including unique functions * Code is based on ircII-Plutonium and more recent ircII-EPiC . Online linux help is available at irc.debian.org. installed-size: 1779 source: ircii-pana Package: buffer Version: 1.17-0bo1 Maintainer: Martin Buck Depends: libc5 (>= 5.4.0-0) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/buffer_1.17-0bo1.deb Size: 11080 MD5sum: 7072c10329c47c80f5227ae4548234e9 Description: Buffering/reblocking program for tape backups, printing, etc. Buffer implements double buffering and can be used to keep backup tapes streaming or printers printing. It can also be used to convert a data stream to a given output blocksize. . Buffer uses shared memory to convert a variable input data rate to a constant output data rate. It is typically used in a pipe between a backup program and the tape device, but there are also other applications like buffering printer data in lpd's input filter. installed-size: 29 Package: data-dumper Version: 2.07-0bo1.1 Priority: optional Section: interpreters Maintainer: Michael Alan Dorman Depends: perl Architecture: all Filename: dists/bo/bo-unstable/binary-i386/data-dumper_2.07-0bo1.1.deb Size: 14292 MD5sum: 988fcaf5a611255fcf19fe8f585b7f71 Description: Store and retrieve perl data structures You may find this module useful if you: . * are writing an application that must display perl data structures. . * want to store some data structures to disk, in either a compact or perl readable format (Dumper outputs pure perl, so you don't have to invent your own portable data format, or parse it; simply "do FILE" or read the data back in with perl and eval() it). See the MLDBM module for an example of one such use. . * want a simple, yet powerful, persistence engine that can be quickly integrated into your application, and is a breeze to debug. . * want a facility to make copies of data, or quickly find differences between data structures. installed-size: 66 Package: debhelper Version: 0.55bo1 Maintainer: Joey Hess Depends: perl, fileutils (>= 3.16-4) Architecture: all Filename: dists/bo/bo-unstable/binary-i386/debhelper_0.55bo1.deb Size: 44748 MD5sum: bc763e47482568300b63e14eb895b35e Description: helper programs for debian/rules A collection of programs that can be used in a debian/rules file to automate common tasks. Programs are included to install various files into your package, compress files, fix file permissions, integrate your package with the debian menu system, etc. installed-size: 115 Package: dnsutils Version: 8.1.2-0.bo1 Priority: standard Section: net Maintainer: Johnie Ingram Conflicts: netstd (<<2.00) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/dnsutils_8.1.2-0.bo1.deb Size: 193580 MD5sum: c20d211503f9f13d370cabd768a679e0 Description: Utilities for querying the DNS This package includes the "nslookup", "dig", and "host" programs for querying information from the Domain Name System (DNS). It also includes several short aliases (mx, ns, soa, zone, aaaa) for querying specific information. installed-size: 479 source: bind Package: epic Version: 3.004-4bo1 Priority: optional Section: net Maintainer: David N. Welton Depends: libc5 (>= 5.4.0-0), ncurses3.0 Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/epic_3.004-4bo1.deb Size: 432060 MD5sum: 049fa0ae05871bbb92c5346849b436d5 Description: Modified ircII client with additional functionality EPIC is 100% backwards compatable with ircII becuase EPIC *is* ircII. EPIC was originally built upon the ircII-2.6 client and has maintained faithfulness to remain current up to the 2.8.2 release. EPIC is somewhat larger than the stock client (24%), but that is mostly because of the multitude of new features, the dual ANSI/K&R compliant function headers, and the large amount of re-written code in an attempt to make ircii faster, more efficient, and more powerful. installed-size: 1564 Package: fileutils Version: 3.16-4bo1.1 Priority: required Section: base Essential: yes Maintainer: Galen Hazelwood Pre-Depends: libc5 (>= 5.4.0-0) Conflicts: color-ls Replaces: color-ls, util-linux (<= 2.7.1-1) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/fileutils_3.16-4bo1.1.deb Size: 418206 MD5sum: ad7614664b38ffa66eadcd0518581f36 Description: GNU file management utilities. The utilities: chgrp chmod chown cp dd df dir dircolors du install ln ls mkdir mkfifo mknod mv rm rmdir touch vdir. installed-size: 1114 Package: giflib-bin Version: 3.0-4.3 Priority: extra Section: non-free Maintainer: Andreas Jellinghaus Depends: giflib3 (= 3.0-4.3), libc5 (>= 5.4.0-0), xlib6 (>= 3.3-0) Conflicts: libgif3-bin Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/giflib-bin_3.0-4.3_i386.deb Size: 88010 MD5sum: 5d68e3d386616afa7dc1a1878ba44f9d Description: programs to convert GIF images These are some programs that use giflib to convert images. installed-size: 313 source: giflib Package: giflib3 Version: 3.0-4.3 Priority: extra Section: non-free Maintainer: Andreas Jellinghaus Depends: libc5 Conflicts: libgif3g, libgif2 Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/giflib3_3.0-4.3_i386.deb Size: 15988 MD5sum: 11ececa7afde61fcab53c407892ced56 Description: shared library for GIF images (runtime lib) This is a shared library for working with GIF images. installed-size: 40 source: giflib Package: giflib3-dev Version: 3.0-4.3 Priority: extra Section: non-free Maintainer: Andreas Jellinghaus Depends: libc5-dev, giflib3 (= 3.0-4.3) Conflicts: giflib-dev, giflib3g-dev, libgif-dev, libgif3g-dev, libgif2-dev Provides: giflib-dev Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/giflib3-dev_3.0-4.3_i386.deb Size: 48826 MD5sum: d00cb4b0d84c7832d54f0e8d70d44a09 Description: shared library for GIF images (development files) This package contains header files needed to compile programs that use giflib. installed-size: 99 source: giflib Package: gmp1 Version: 1.3.2-8 Priority: extra Section: libs Maintainer: Dale Scheetz Depends: libc6 Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/gmp1_1.3.2-8.deb Size: 55312 MD5sum: 521fee2583f85762c21d61ad4678fdbf Description: Multiprecision arithmetic library GNU MP is a programmer's library for arbitrary precision arithmetic (ie, a bignum package). It can operate on signed integers and rational numbers. . It has a rich set of functions, and the functions have a regular interface. . Programs you build using GNU MP become covered by the GNU General Public Licence (GPL) because of the way GNU MP is licensed. installed-size: 109 Package: gmp1-dev Version: 1.3.2-8 Priority: extra Section: devel Maintainer: Dale Scheetz Depends: gmp1 Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/gmp1-dev_1.3.2-8.deb Size: 65960 MD5sum: 79f50267cbcf3c584b5ef7f525801df9 Description: Multiprecision arithmetic library developers tools. This development package provides the header files and the symbolic links to allow compilation and linking of programs that use the libraries provided in the gmp1 package. installed-size: 244 source: gmp1 Package: gnuplot Version: 3.5beta6.340-0bo1 Priority: optional Section: math Maintainer: tibor simko Depends: libc5 (>= 5.4.0-0), libreadline2 (>= 2.1), ncurses3.0, svgalib1 (>= 1:1.2.10-2), xlib6 (>= 3.3-0) Recommends: c-shell Suggests: suidmanager Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/gnuplot_3.5beta6.340-0bo1.deb Size: 996002 MD5sum: fc1578a1ad25a7863323289c05c7961c Description: A command-line driven interactive plotting program. Package for making 2D and 3D graphs from data and functions. Supports lots of output formats, including drivers for many printers, (La)TeX, (x)fig, X11, PostScript, and so on. . Data files and self-defined functions can be manipulated by internal C-like language. Can perform smoothing, spline-fitting, or nonlinear fits. Can work with complex numbers. installed-size: 1843 Package: groff Version: 1.11a-0bo2 Priority: important Section: text Maintainer: Fabrizio Polacco Depends: libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1) Suggests: xlib6 (>= 3.3-0) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/groff_1.11a-0bo2.deb Size: 964564 MD5sum: 379db3bca19f97d6d84b6a2f0232cacf Description: GNU troff text-formatting system. This package contains the traditional UN*X text formatting tools troff, nroff, tbl, eqn and pic. These utilities, together with the man package, are essential for displaying the on-line manual pages. . Output can be produced in a number of formats including plain ASCII and PostScript. All the standard macro packages are supported. A number of other utilities are also included together with several fonts. installed-size: 2917 Package: gs-aladdin Version: 5.10-2bo3 Priority: optional Section: non-free Maintainer: Marco Pistore Depends: libc5 (>= 5.4.0-0), libjpeg6a, libpaper (>= 1.0.2-1), libpng1 (>= 0.88), svgalib1 (>= 1:1.2.10-2), xlib6 (>= 3.3-0) Recommends: gsfonts (>=4.01-3) Conflicts: gs, gs_x, gs_svga, gs_both Provides: gs, gs_x, gs_svga, gs_both, postscript-viewer Replaces: gs Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/gs-aladdin_5.10-2bo3.deb Size: 1251548 MD5sum: a1d76348104e32f71fa76acc40260b26 Description: Postscript interpreter with X11 and svgalib preview support. This version is Aladdin copyright, not GNU copyleft, see /usr/doc/gs-aladdin/copyright. . Ghostscript is used for postscript preview and printing. Usually as a back-end to a program such as ghostview, it can display postscript documents in an X11 environment. It can also use the Linux svga library to display documents graphically on the Linux console. . Furthermore, it can render postscript files as graphics to be printed on non-postscript printers. Supported printers include common dot-matrix, inkjet and laser models. . The Ghostscript World Wide Web home page is at http://www.cs.wisc.edu/~ghost/index.html . This package also contains the hpdj driver contributed by Martin Lottermoser. installed-size: 2684 Package: gv Version: 3.5.8-1bo4 Priority: optional Section: text Maintainer: Karl M. Hegbloom Depends: gs, libc5 (>= 5.4.0-0), xaw3d, xlib6 (>= 3.3-0) Suggests: gs-aladdin Conflicts: gv-2d, gv-3d Provides: postscript-viewer, pdf-viewer Replaces: gv-2d, gv-3d Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/gv_3.5.8-1bo4.deb Size: 223028 MD5sum: 066377af47fdc70593006090a65d3297 Description: A PostScript and PDF viewer for X using 3d Athena Widgets `gv' is a comfortable viewer of PostScript and PDF files for the X Window System. . From version 3.0 on `gv' cannot be used with the standard Athena Widget library. Nevertheless you don not have to use the 3d Widgets for anything else as this version is compiled using `-rpath /usr/X11R6/lib/Xaw3d'. . It uses the `gs' PostScript(tm) interpreter and is based on the classic X front-end for `gs', `ghostview'. It is more comfortable and more powerful than `ghostview'. . Some features as e.g. PDF files or anti-aliasing are only supported if a recent Aladdin ghostscript (4.0 or later) is installed. With anti-aliasing turned on, the text is very crisp and readable, with no `stepping' on the slants at all. For this reason, the `gs-aladdin' package, to be found in `non-free' due to Aladdin's licenceing, is highly recommended. . The new `gs-aladdin', version (>= 4.0), can view PDF files. It is mostly compliant with Adobe's PDF format, so it has less problems than `xpdf'. There is no support for encrypted pdf files. It provides much better output than `xpdf' and even `AcroRead' (Adobe's PDF Reader) but is slower and does not yet support hyperlinks. installed-size: 468 Package: hyphen-show Version: 0.1-0bo1 Maintainer: Martin Buck Depends: libc5 (>= 5.4.0-0) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/hyphen-show_0.1-0bo1.deb Size: 8168 MD5sum: 8d25c7a23e48302f8bfc4ac934ca0afa Description: Show hyphenations in DVI-files hyphen_show scans a DVI-file, tries to find all hyhenations and writes them to stdout. It is useful to check whether TeX's hyphenation algorithm really did the good job it is supposed to do. installed-size: 24 Package: ircii Version: 2.9.3roof-2 Priority: optional Section: net Maintainer: Bernd Eckenfels Depends: libc5 (>= 5.4.0-0), ncurses3.0 Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/ircii_2.9.3roof-2.deb Size: 343312 MD5sum: fbb335d1df09ba267c8e5d9ac184e0df Description: Internet Relay Chat client The ircII program is a full screen, termcap based interface to Internet Relay Chat. It gives full access to all of the normal IRC functions, plus a variety of additional options. installed-size: 1234 Package: isdnutils Version: 1:2.1.beta1-15bo17 Priority: extra Section: net Maintainer: Paul Slootman Depends: ldso (>= 1.8.0-0), libc5 (>= 5.4.0-0), libgdbm1, ncurses3.0, tcl76, xlib6 (>= 3.3-0), makedev (>>1.6-10), suidmanager, netbase (>= 2.14), sox Suggests: ppp, tcpdump (>= 3.3.1a2-1) Conflicts: vbox, isdnlog, ipppd, xisdnutils Replaces: vbox Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/isdnutils_2.1.beta1-15bo17.deb Size: 1073066 MD5sum: 19eabd207f0a6010eb1c01d1c0ac1ac4 Description: isdn utilities This package includes everything you need to run ISDN: interface controlling programs, an ISDN logging tool, a voice box program, a synchronous PPP daemon, an ISDN load viewer, and much more. . This package will only run with 2.0.31 or 2.0.32 (and possibly higher) kernels. installed-size: 2115 Package: jove Version: 4.16-1bo2 Priority: optional Section: editors Maintainer: Loic Prylli Depends: libc5 (>= 5.4.0-0), ncurses3.0 Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/jove_4.16-1bo2.deb Size: 165698 MD5sum: ca14781bb80721f044f960d06763831d Description: JOVE is Jonathan's Own Version of Emacs, a small and powerful editor. It has the same interface as the original EMACS editor written at MIT by Richard Stallman. Although JOVE is meant to be compatible with EMACS for usual commands, there are some major differences between the two editors. It is a very light editor (~100Kbyte), good replacement for vi. installed-size: 432 Package: kdebase Version: 1:Beta2-2.1 Priority: optional Section: non-free Maintainer: Andreas Jellinghaus Depends: menu (>=1.5-5), giflib3, kdelibs0 (=1:Beta2-2.1), libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1), mesa2 (>= 2.1-1), qt1(>= 1.30), xlib6 (>= 3.3-0) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/kdebase_Beta2-2.1_i386.deb Size: 1894236 MD5sum: 7535d3e67c6015f47879f5cd477a4f07 Description: KDE core applications This is a suite of all kde core applications : file manager kfm, window manager kwm, desktop manager kdm and others. installed-size: 5738 Package: kdegames Version: 1:Beta2-2.1 Priority: optional Section: non-free Maintainer: Andreas Jellinghaus Depends: kdelibs0 (=1:Beta2-2.1), libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1), qt1(>= 1.30), xlib6 (>= 3.3-0) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/kdegames_Beta2-2.1_i386.deb Size: 1159172 MD5sum: 039fac2a42158ab2959a2a6ca4d76312 Description: KDE games collection This is a collection of several games written for kde. installed-size: 3840 Package: kdegraphics Version: 1:Beta2-2.1 Priority: optional Section: non-free Maintainer: Andreas Jellinghaus Depends: kdebase, giflib3, kdelibs0 (=1:Beta2-2.1), libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1), qt1(>= 1.30), xlib6 (>= 3.3-0) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/kdegraphics_Beta2-2.1_i386.deb Size: 536664 MD5sum: 603492e1ce2662cfcfd3892d1c49d3db Description: KDE collection of graphics programs. This collections includes kfax kfractint kghostview kpaint kview installed-size: 1564 Package: kdelibs0 Version: 1:Beta2-2.1 Priority: extra Section: contrib Maintainer: Andreas Jellinghaus Depends: libc5, libg++27, giflib3, libjpeg6a, qt1 (>= 1.3), xlib6 (>= 3.3-0) Conflicts: libkde0.9.00, libkde0, kdeapps Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/kdelibs0_Beta2-2.1_i386.deb Size: 440356 MD5sum: 4427f6685df46f7959182eebaad99950 Description: KDE core libraries (runtime files) KDE core libraries. You need these files to run kde applications. installed-size: 1341 source: kdelibs Package: kdelibs0-dev Version: 1:Beta2-2.1 Priority: extra Section: contrib Maintainer: Andreas Jellinghaus Depends: libc5-dev, kdelibs0 (= 1:Beta2-2.1) Suggests: kdebase Conflicts: kdelibs-dev, libkde0-dev, libkde0.9.00-dev Provides: kdelibs-dev Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/kdelibs0-dev_Beta2-2.1_i386.deb Size: 693668 MD5sum: 30b3eb3e3c976e869f10d48f0ba8b6a7 Description: KDE core libraries (development files) KDE core libraries. You need these files to compile kde applications. installed-size: 2606 source: kdelibs Package: kdemultimedia Version: 1:Beta2-2.1 Priority: optional Section: non-free Maintainer: Andreas Jellinghaus Depends: kdelibs0 (=1:Beta2-2.1), libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1), qt1(>= 1.30), xlib6 (>= 3.3-0) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/kdemultimedia_Beta2-2.1_i386.deb Size: 124828 MD5sum: f9edf01e9bc943598d4b03d46c9cf498 Description: KDE multimedia package This is a collection of kde programms related to multimedia : kmix - a mixer, kscd - a cd program, kmedia - a music player installed-size: 450 Package: kdenetwork Version: 1:Beta2-2.1 Priority: optional Section: non-free Maintainer: Andreas Jellinghaus Depends: giflib3, kdelibs0 (=1:Beta2-2.1), kdesupport0 (=1:Beta2-2.1), libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1), libgdbm1, qt1(>= 1.30), xlib6 (>= 3.3-0) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/kdenetwork_Beta2-2.1_i386.deb Size: 420878 MD5sum: 36ac31defba40df6d07dd4d545cbd998 Description: KDE mail and news clients KDE has a mail client (kmail) and a news client (krn) available via this package. KDE is the K desktop project (see www.kde.org). installed-size: 1268 Package: kdesupport0 Version: 1:Beta2-2.1 Priority: optional Section: non-free Maintainer: Andreas Jellinghaus Depends: libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/kdesupport0_Beta2-2.1_i386.deb Size: 102956 MD5sum: ced48b9053f8cf2e1dba916ce92141e1 Description: mime and uuencode/decode library - runtime version This library is used by kde to handle mime types and uuencoding/decoding. installed-size: 275 source: kdesupport Package: kdesupport0-dev Version: 1:Beta2-2.1 Priority: optional Section: non-free Maintainer: Andreas Jellinghaus Depends: libc5-dev, kdesupport0 (=1:Beta2-2.1) Conflicts: kdesupport-dev Provides: kdesupport-dev Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/kdesupport0-dev_Beta2-2.1_i386.deb Size: 204330 MD5sum: 85dd68f723b0f3529c1abc33c784c54c Description: mime and uuencode/decode library - development version This library is used by kde to handle mime types and uuencoding/decoding. installed-size: 770 source: kdesupport Package: kdeutils Version: 1:Beta2-2.1 Priority: optional Section: non-free Maintainer: Andreas Jellinghaus Depends: kdelibs0 (=1:Beta2-2.1), libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1), qt1(>= 1.30), xlib6 (>= 3.3-0) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/kdeutils_Beta2-2.1_i386.deb Size: 322502 MD5sum: 23ff67b7ece622b66c8d9e8652c2310d Description: collection of usefull kde utilities this collection includes karm kcalc kedit khexdit kjots knotes kzip (calculator, editor, hex editor ...) installed-size: 1080 Package: lftp Version: 0.13.1-0bo1 Priority: optional Section: net Maintainer: Nicolás Lichtmaier Depends: libc5 (>= 5.4.0-0), libreadline2 (>= 2.1), ncurses3.0, netbase Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/lftp_0.13.1-0bo1.deb Size: 113192 MD5sum: febb74416178f4d3e9c6c70edeb2005b Description: Sophisticated command-line FTP client programs The main two advantages over other ftp clients are reliability and ability to perform tasks in background. It will reconnect and reget the file being transferred if the connection broke. You can start a transfer in background and continue browsing on the ftp site. It does this all in one process. When you have started background jobs and feel you are done, you can just exit lftp and it automatically moves to nohup mode and completes the transfers. It has also such nice features as reput and mirror. . This package also includes: * ftpget - a simple non-interactive tool for downloading files * parallelftp - Uses several connections to download single file. It can be useful to download a file ASAP trough a busy link. installed-size: 246 Package: libc5 Version: 5.4.38-1 Priority: required Section: base Maintainer: Helmut Geyer Pre-Depends: ldso (>=1.7.14-2) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libc5_5.4.38-1.deb Size: 283926 MD5sum: 977d7f72af3e6e5318a2fd282822e64d Description: The Linux C library version 5 (run-time libraries). Includes shared libraries needed to run programs built with libc 5. These libraries are modified to make them work better in a libc6 environment. installed-size: 665 source: libc Package: libc5-altdbg Version: 5.4.38-1 Priority: optional Section: oldlibs Maintainer: Helmut Geyer Depends: libc5-altdev (=5.4.38-1) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libc5-altdbg_5.4.38-1.deb Size: 1215870 MD5sum: 71bf007b3ad8a553d31cc5881b0c6b9d Description: The Linux C library version 5 (alternative debug files). Includes a static libraries compiled with debugging info. This package can be used to debug libc5 even when the libc6-dev package is installed. installed-size: 5822 source: libc Package: libc5-altdev Version: 5.4.38-1 Priority: standard Section: oldlibs Maintainer: Helmut Geyer Depends: libc5 (=5.4.38-1) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libc5-altdev_5.4.38-1.deb Size: 889472 MD5sum: 7344800997a9e72ddbfb26acc0f4c137 Description: The Linux C library version 5 (alternative dev files). Includes libc headers, kernel headers (v2.0.29) and static libraries. This package can be used to build libc5-base binaries even when the libc6-dev package is installed. installed-size: 3601 source: libc Package: libc5-dbg Version: 5.4.38-1 Priority: optional Section: devel Maintainer: Helmut Geyer Depends: libc5-dev (=5.4.38-1) Conflicts: libc (<<4.6.27-11), libc-dev Provides: libc-dev Replaces: ppp (<<2.2.0f-22) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libc5-dbg_5.4.38-1.deb Size: 1215858 MD5sum: 5bce1633b8149e52e9aa1f5394a70e4d Description: The Linux C library version 5 (debug files). Includes static libraries compiled with debugging info. This package can be used to debug libc5. installed-size: 5821 source: libc Package: libc5-dev Version: 5.4.38-1 Priority: standard Section: devel Maintainer: Helmut Geyer Depends: libc5 (=5.4.38-1) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libc5-dev_5.4.38-1.deb Size: 889360 MD5sum: 8132222aa565bdd067f025261c749b8d Description: The Linux C library version 5 (dev files). Includes libc headers, kernel headers (v2.0.29) and static libraries. installed-size: 3600 source: libc Package: libcgi-perl Version: 2.76-2bo1.1 Maintainer: Manoj Srivastava Depends: perl, libwww-perl Conflicts: CGI-modules Replaces: perl, CGI-modules Architecture: all Filename: dists/bo/bo-unstable/binary-i386/libcgi-perl_2.76-2bo1.1.deb Size: 125374 MD5sum: 3d3d64d156991174f86a74d5d52d536b Description: modules for perl5, for use in writing CGI scripts. In addition to this package, you will also need the URI::Unescape class, which is part of the libwww-perl package. This is the replacement for the now obsolete CGI-modules package. . This package is destined to replace libcgi-pm-perl, but at the moment libcgi-pm-perl (as in the library CGI.pm) serves as the rapid prototyping version, and may be more featureful than this package. . This perl 5 library uses objects to create Web fill-out forms on the fly and to parse their contents. It provides a simple interface for parsing and interpreting query strings passed to CGI scripts. However, it also offers a rich set of functions for creating fill-out forms. Instead of remembering the syntax for HTML form elements, you just make a series of perl function calls. An important fringe benefit of this is that the value of the previous query is used to initialize the form, so that the state of the form is preserved from invocation to invocation. installed-size: 317 Package: libcurses-perl Version: 1.01-0bo1.1 Maintainer: John Goerzen Depends: perl (>= 5.004), libc5 (>= 5.4.0-0), ncurses3.0 Conflicts: perl-curses Provides: perl-curses Replaces: perl-curses Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libcurses-perl_1.01-0bo1.1.deb Size: 40274 MD5sum: 37eeb5f02b2220eff86ccff3bed4980f Description: Curses interface for Perl libcurses-perl (the Curses module from CPAN) will let you use the ncurses/curses terminal screen manipulation routines from Perl programs. . This package was previously called perl-curses. To comply with informal Debian standards, it has been renamed to libcurses-perl. installed-size: 128 Package: libdbd-msql-perl Version: 0.91-1bo1.1 Priority: optional Section: contrib Maintainer: Martin Schulze Depends: perl (>=5.004.04-1), libdbi-perl (>=0.84-1), libc5 (>= 5.4.0-0), libmsql1 (>= 1.0.16-1) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libdbd-msql-perl_0.91-1bo1.1.deb Size: 36162 MD5sum: bd953c7efb47a3aeaa7c882e133b918d Description: Perl interface to mSQL databases This package provides an interface between the perl programming language and the mSQL programming API that comes with the mSQL relational database management system. It is based on the DBI interface for Perl 5 . You can connect to multiple mSQL database servers and send multiple queries to any of them via an simple object oriented interface. Two types of objects are available: database handles and statement handles. installed-size: 77 source: msql-modules Package: libdbd-mysql-perl Version: 1.1826-0bo2.1 Priority: extra Section: contrib Maintainer: Ben Gertzfield Depends: libc5 (>= 5.4.0-0), perl (>=5.004.04), libdbi-perl Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libdbd-mysql-perl_1.1826-0bo2.1.deb Size: 133124 MD5sum: 6b16e0aa2d83fb6ecdeea61f49b2add9 Description: mySQL 1.x interface for Perl 5 This package contains a mySQL interface for Perl 5 based on the DBI interface. installed-size: 314 Package: libdbi-perl Version: 0.92-0bo2.1 Priority: extra Section: contrib Maintainer: Ben Gertzfield Depends: perl (>=5.004.04-3) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libdbi-perl_0.92-0bo2.1.deb Size: 156196 MD5sum: 54a46883b5f76bd67be71d9112505893 Description: The Perl5 Database Interface by Tim Bunce This DBI interface is not yet fully specified. The current development work is focused on writing drivers, such as DBD::Oracle, which also implement emulations of old perl4 database interfaces, e.g., oraperl. This strategy enables the DBI and drivers to serve a useful purpose whilst allowing the real interface to evolve with experience behind the emulation interface. installed-size: 348 Package: libmime-base64-perl Version: 2.03-0bo1.1 Maintainer: Michael Alan Dorman Depends: perl (>=5.004.02-2), libc5 (>= 5.4.0-0) Replaces: libwww, libwww-perl Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libmime-base64-perl_2.03-0bo1.1.deb Size: 11934 MD5sum: f251b94e7757721df4e7fdb7b1d0ed2b Description: MIME/Base64 decoding for Perl Libmime-base64-perl is a collection of Perl modules which provide simple and consistent methods for dealing with Base64 encoding. installed-size: 48 Package: libmime-perl Version: 3.204-0bo1.1 Maintainer: Dirk Eddelbuettel Depends: perl, libwww-perl, mailtools Architecture: all Filename: dists/bo/bo-unstable/binary-i386/libmime-perl_3.204-0bo1.1.deb Size: 230326 MD5sum: 033b43debba849780ae825036e2c101a Description: Perl5 modules for MIME-compliant messages (MIME-tools) MIME-tools is a collection of Perl5 MIME:: modules for parsing, decoding, and generating single- or multipart (even nested multipart) MIME messages. installed-size: 602 Package: libmsql1 Version: 1.0.16-7bo1.1 Priority: optional Section: non-free Maintainer: Martin Schulze Depends: libc5 (>= 5.4.0-0) Suggests: msql | msqld Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libmsql1_1.0.16-7bo1.1.deb Size: 53388 MD5sum: 5e55ec196269a5d01c894793ebaf5dcc Description: MiniSQL library [libc6] This package contains the shared mSQL library together with header files and manual pages. installed-size: 108 source: msql Package: libnet-perl Version: 1.0502-0bo1.1 Priority: optional Section: interpreters Maintainer: Michael Alan Dorman Depends: perl (>=5.003.07), data-dumper Conflicts: libnet Provides: libnet Replaces: libnet Architecture: all Filename: dists/bo/bo-unstable/binary-i386/libnet-perl_1.0502-0bo1.1.deb Size: 66002 MD5sum: 02428606a22e9bd630cdc388406e165e Description: Implementation of Internet protocols for Perl libnet contains Perl implementations of the following protocols: Net::FTP (RFC959), Net::SMTP (RFC821), Net::Telnet (RFC854), Net::Time (RFC867 & RFC868), Net::NNTP (RFC977), Net::POP3 (RFC1939), Net::SNPP (RFC1861) It also contains various utility functions for implementing new protocols. installed-size: 305 Package: libpgjava Version: 6.2.1-11bo1.1 Priority: optional Section: contrib Maintainer: Oliver Elphick Depends: jdk1.1-runtime (>= 1.1.3.v2-1), libpgsql Suggests: postgresql-doc Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libpgjava_6.2.1-11bo1.1.deb Size: 33472 MD5sum: 13f677316cfc1db15085c016448f7f50 Description: JDBC Java class archive for PostgreSQL. A java class archive of classes that enable communication with the PostgreSQL database backend using JDBC. installed-size: 91 source: postgresql Package: libpgperl Version: 6.2.1-11bo1.1 Priority: optional Section: libs Maintainer: Oliver Elphick Depends: ldso (>= 1.8.0-0), libc5 (>= 5.4.0-0), libpgsql, libreadline2 (>= 2.1), ncurses3.0, perl (>= 5.004), libpgsql Suggests: postgresql-doc Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libpgperl_6.2.1-11bo1.1.deb Size: 23680 MD5sum: 07747b1e0029f6ede23f4b16ccaa4b19 Description: Perl modules for PostgreSQL. A library to enable Perl scripts to communicate with the PostgreSQL database backend. installed-size: 90 source: postgresql Package: libpgsql Version: 6.2.1-11bo1.1 Priority: optional Section: libs Maintainer: Oliver Elphick Suggests: postgresql-doc Conflicts: libpq1,postgres95 Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libpgsql_6.2.1-11bo1.1.deb Size: 21752 MD5sum: 0b0b7ac4dd7f268811b4315c5268e8a6 Description: Shared library for PostgreSQL C and C++ libraries to enable user programs to communicate with the PostgreSQL database backend. The backend can be on another machine and accessed through TCP/IP. . This library is used by all PostgreSQL programs. installed-size: 57 source: postgresql Package: libpgtcl Version: 6.2.1-11bo1.1 Priority: optional Section: libs Maintainer: Oliver Elphick Depends: ldso (>= 1.8.0-0), libc5 (>= 5.4.0-0), libpgsql, libreadline2 (>= 2.1), ncurses3.0, tcl80, tk80, libpgsql Suggests: postgresql-doc Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libpgtcl_6.2.1-11bo1.1.deb Size: 41324 MD5sum: 61560f6deb7f2865b7f92dcce852e288 Description: Tcl/Tk library and front-end for PostgreSQL. A library to enable Tcl/Tk scripts to communicate with the PostgreSQL database backend. A frontend script, pgaccess.tcl, is included. installed-size: 179 source: postgresql Package: libreadline2 Version: 2.1-2bo7.3 Priority: required Section: base Maintainer: Guy Maor Depends: libc5 (>= 5.4.0-0), ncurses3.0 Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libreadline2_2.1-2bo7.3.deb Size: 69214 MD5sum: 6b81090bc7ecf5aff6591ecb54901e9d Description: GNU readline and history libraries, run-time libraries. The GNU readline library aids in the consistency of user interface across discrete programs that need to provide a command line interface. . The GNU history library provides a consistent user interface for recalling lines of previously typed input. installed-size: 169 source: bash (2.01-0bo5.3) Package: libreadline2-dbg Version: 2.1-2bo7.3 Priority: optional Section: devel Maintainer: Guy Maor Depends: libreadline2-dev (= 2.1-2bo7.3) Conflicts: libreadline-dbg Provides: libreadline-dbg Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libreadline2-dbg_2.1-2bo7.3.deb Size: 180536 MD5sum: 2b25889425b8f2d5f826c6f33f31ad22 Description: GNU readline and history libraries, debugging libraries. The GNU readline library aids in the consistency of user interface across discrete programs that need to provide a command line interface. . The GNU history library provides a consistent user interface for recalling lines of previously typed input. installed-size: 613 source: bash (2.01-0bo5.3) Package: libreadline2-dev Version: 2.1-2bo7.3 Priority: standard Section: devel Maintainer: Guy Maor Depends: libreadline2 (= 2.1-2bo7.3), libc5 (>= 5.4.0-0), ncurses3.0, libc5-dev Conflicts: libreadline-dev Provides: libreadline-dev Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libreadline2-dev_2.1-2bo7.3.deb Size: 138462 MD5sum: d672e79c68ab1cf2e39fc3c5c34a0cac Description: GNU readline and history libraries, development files. The GNU readline library aids in the consistency of user interface across discrete programs that need to provide a command line interface. . The GNU history library provides a consistent user interface for recalling lines of previously typed input. installed-size: 333 source: bash (2.01-0bo5.3) Package: libterm-readkey-perl Version: 2.09-1bo1.1 Maintainer: Kai Henningsen Depends: perl, libc5 (>= 5.4.0-0) Conflicts: libtermreadkey-perl Provides: libtermreadkey-perl Replaces: adbbs, libtermreadkey-perl Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libterm-readkey-perl_2.09-1bo1.1.deb Size: 18274 MD5sum: 35a8ce4e1980d24f64a81429fdba1387 Description: Change terminal modes, and perform non-blocking reads This module, Term::ReadKey, provides ioctl control for terminals so the input modes can be changed (thus allowing reads of a single character at a time), and also provides non-blocking reads of stdin, as well as several other terminal related features, including retrieval/modification of the screen size, and retrieval/modification of the control characters. installed-size: 74 Package: libtime-hires-perl Version: 1.16-0bo1.1 Maintainer: Michael Alan Dorman Depends: perl (>=5.004) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/libtime-hires-perl_1.16-0bo1.1.deb Size: 10058 MD5sum: c26a047b2aa514ceba50b8b45f5e7534 Description: High-resolution time manipulation in perl Libtime-hires-perl is a Perl module for dealing with high-resolution time interfaces. installed-size: 34 Package: libwww-perl Version: 5.17-0bo1.1 Priority: optional Section: interpreters Maintainer: Michael Alan Dorman Depends: perl (>=5.002), libnet-perl, libmime-base64-perl Recommends: libmd5-perl Architecture: all Filename: dists/bo/bo-unstable/binary-i386/libwww-perl_5.17-0bo1.1.deb Size: 252554 MD5sum: 6b26ae2abd2d76b3f13c63f7a2064351 Description: WWW client/server library for Perl Libwww-perl is a collection of Perl modules which provides a simple and consistent programming interface (API) to the World-Wide Web. The main focus of the library is to provide classes and functions that allow you to write WWW clients, thus libwww-perl said to be a WWW client library. The library also contain modules that are of more general use, as well as a simple HTTP/1.1-compatible server implementation. installed-size: 1107 Package: lyx Version: 1:0.12.0-2bo0.1 Priority: optional Section: contrib Maintainer: Paul Seelig Depends: libc5 (>= 5.4.0-0), xlib6 (>= 3.3-0), xpm4.7 (>= 3.4g-0) Recommends: latex, dvips, tetex-base|ltxgraph Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/lyx_0.12.0-2bo0.1.deb Size: 1218670 MD5sum: b50ee24cb7564caddb7c4197bfe7c612 Description: High Level Word Processor (BETA version) LyX is an almost WYSIWYG-frontend for LaTeX that runs under the X Window System. It makes the power and typesetting quality of LaTeX available for people who are used to word processors. Since LyX supports LaTeX's concept of general mark-ups, it is even easier and faster to create professional quality documents with it than with usual word processors. It is also possible to use LaTeX-commands within LyX, so nothing of LaTeX's power is lost. . Note that LyX is still under development. It may still have some bugs. But it is already very usable. installed-size: 4424 Package: mailtools Version: 1.09-0bo1.1 Priority: optional Section: mail Maintainer: Michael Alan Dorman Depends: perl, libnet Architecture: all Filename: dists/bo/bo-unstable/binary-i386/mailtools_1.09-0bo1.1.deb Size: 38756 MD5sum: c2958d11d55f827ea2d713a5958d003f Description: Mainpulate email in perl This is a set of perl modules which provide an easy interface to manipulating email in an object-oriented fashion. installed-size: 193 Package: man-db Version: 2.3.10-59bo61 Priority: important Section: doc Maintainer: Fabrizio Polacco Depends: groff, libc5 (>= 5.4.0-0), libdb1 (>= 1.85.4-4) Suggests: bsdmainutils Conflicts: man, man-aeb Provides: man, man-browser Replaces: man, man-aeb, nlsutils Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/man-db_2.3.10-59bo61.deb Size: 269152 MD5sum: a95ba04a1cec67b55152acbea29a041b Description: Display the on-line manual. This packages provides the man command, this utility is the primary way of examining the on-line help files (manual pages). Other utilities provided include the whatis and apropos commands for searching the manual page database; the manpath utility for determining the manual page search path and the maintenance utilities mandb, catman and zsoelim. This package uses the groff suit of programs to format and display the manual pages. installed-size: 559 Package: mc Version: 4.1.27-1bo1 Priority: optional Section: utils Maintainer: Paul Seelig Depends: e2fsprogs (>=1.06-1), libc5 (>= 5.4.0-0), libgpm1 (>= 1.10-1), ncurses3.0, slang0.99.34 (>=0.99.38) Suggests: gpm Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/mc_4.1.27-1bo1.deb Size: 391084 MD5sum: f206ed0fa72eb35e484ac6a02d01db05 Description: Midnight Commander - A powerful file manager. Midnight Commander is a feature-rich file manager. It has mouse support in a linux console and in an xterm. It started as a Norton Commander clone but now it is far superior to it. Among other things it can do FTP, includes a hexeditor, comes with an internal editor which can be invoked separately as 'mcedit' and lets you do most system administration tasks. Browsing, unpacking and installation of Debian packages is possible by just pressing enter on a *.deb file. Handling of other archive formats like rpm, zip, zoo and tar.gz is equally supported. This version comes with undelete for ext2 filesystems compiled in. installed-size: 800 Package: menu Version: 1.5-5.1 Priority: optional Section: admin Maintainer: joost witteveen Depends: libc5 (>= 5.4.0-0) Conflicts: pdmenu (<=0.5.9) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/menu_1.5-5.1_i386.deb Size: 299190 MD5sum: 03354f0b6be7170832529bb33d15dd02 Description: provides update-menus functions for some applications The intent of this package is to streamline the menu's (like the fvwm2 ones) in debian. For this purpose, it provides a "update-menus" programme, that will check for new menu files (as provided by other packages in /usr/lib/menu), and run the install programmes in /etc/menu-methods of the various window managers (or console menu's, like pdmenu) on the new menufiles. Also in this package are a couple menu entries, as an example. The system admin can easily override these, as can any package maintainer. installed-size: 1084 Package: mh Version: 6.8.4-13bo18 Priority: standard Section: mail Maintainer: Philip Hands Depends: libc5 (>= 5.4.0-0), ncurses3.0 Recommends: mail-transport-agent Suggests: exmh Provides: mail-reader Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/mh_6.8.4-13bo18.deb Size: 1220810 MD5sum: d2cc835bfff7db529a8ce4572f739857 Description: A set of electronic mail handling programs. Unlike most mail user agents, MH is not a single program, rather it is a set of program that are run from the shell. This allows the user to utilize the full power of the Unix shell in coordination with MH. . This package is not being actively maintained upstream. I recomend you use the largely equivalent nmh package instead. installed-size: 2964 Package: mh-papers Version: 6.8.4-13bo18 Priority: optional Section: mail Maintainer: Philip Hands Recommends: tex, latex Suggests: mh Architecture: all Filename: dists/bo/bo-unstable/binary-i386/mh-papers_6.8.4-13bo18.deb Size: 307892 MD5sum: 520828cac080a7b0b5ea92b73dcdddef Description: Documentation for the MH mail handling programs There is a considerable quantity of tutorial and background documentation for MH (in TeX format) that has been separated into this package to avoid bloating the main MH package. installed-size: 459 source: mh Package: mlddc Version: 3.2.2-0bo3 Priority: optional Section: net Maintainer: Depends: libc5 (>= 5.4.0-0) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/mlddc_3.2.2-0bo3.deb Size: 8844 MD5sum: df19597dd8d53f4af54a563e2b699279 Description: A client for the Monolith dynamic DNS. mlddc is a client for the Monolith ( http://www.ml.org ) dynamic DNS ( DYNDNS, http://www.ml.org/dyndns/ ) service. It updates the ML database and nameservers with the current IP. installed-size: 28 Package: msql Version: 1.0.16-7bo1.1 Priority: optional Section: non-free Maintainer: Martin Schulze Depends: libc5 (>= 5.4.0-0) Suggests: bc Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/msql_1.0.16-7bo1.1.deb Size: 136024 MD5sum: 0ace29e97fe28d2e8b905c8c6129662c Description: MiniSQL clients This package contains some frontends programs for the mSQL database engine. These programs need not necessarily be installed on the database server. installed-size: 188 Package: msqld Version: 1.0.16-7bo1.1 Priority: optional Section: non-free Maintainer: Martin Schulze Depends: libc5 (>= 5.4.0-0), msql Suggests: smail | mail-transport-agent Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/msqld_1.0.16-7bo1.1.deb Size: 56892 MD5sum: 186a2b39919d7a1a945464be24269971 Description: MiniSQL engine MiniSQL is an ANSI-SQL database that is offered to the public under a limited commercial license. . mSQL has been designed to provide fast access to stored data with low memory requirements. As its name implies mSQL (or MiniSQL) offers a subset of ANSI-SQL as its query interface. Although it only supports a subset of SQL, everything it supports is in accordance with the ANSI SQL specification. installed-size: 152 source: msql Package: msqlperl Version: 1:0.91-1bo1.1 Priority: optional Section: non-free Maintainer: Martin Schulze Depends: perl (>=5.004.04-1), libc5 (>= 5.4.0-0), libmsql1 (>= 1.0.16-1) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/msqlperl_0.91-1bo1.1.deb Size: 50394 MD5sum: e38b1e880384efa023dd7ed6978485ec Description: Perl library for accessing mSQL databases This Perl library provides an interface between the Perl programming language and the mSQL programming API that comes with the mSQL relational database management system. All functions provided by the mSQL programming API are supported. . You can connect to multiple mSQL database servers and send multiple queries to any of them via an simple object oriented interface. Two types of objects are available: database handles and statement handles. installed-size: 115 source: msql-modules (0.91-1bo1.1) Package: mutt Version: 0.88-1bo1 Maintainer: J.H.M. Dassen Depends: libc5 (>= 5.4.0-0), slang0.99.34 (>=0.99.38), mail-transport-agent Recommends: mime-support, ispell Suggests: pgp Provides: mail-reader Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/mutt_0.88-1bo1.deb Size: 230356 MD5sum: 6c669c1793211486939aba4c1b425dc7 Description: Text-based mailreader supporting MIME, PGP and threading. Mutt is a sophisticated text-based Mail User Agent. Some highlights: o MIME support (including RFC1522 encoding/decoding of 8-bit message headers). o PGP/MIME support (RFC 2015). o POP3 support. o Mailbox threading (both strict and non-strict). o Default keybindings are much like ELM. o Keybindings are configurable; Mush and PINE-like ones are provided as examples. o Handles MMDF, MH and maildir in addition to regular mbox format. o Messages may be (indefinitely) postponed. o Colour support. o Highly configurable through easy but powerful rc file. installed-size: 404 Package: mysql Version: 3.21.19.beta-0bo1.1 Maintainer: Scott Hanson Depends: libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1), libreadline2 (>= 2.1), ncurses3.0 Suggests: mysql-manual Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/mysql_3.21.19.beta-0bo1.1.deb Size: 1831442 MD5sum: aa90edbc4df7abd8bb6c0a6cc0b6c9c5 Description: SQL database server mysql is a SQL (Structured Query Language) database server. mysql was written by Michael (monty) Widenius. See the CREDITS file in the distribution for more credits for mysql and related things. . Please make sure to read README.debian if you are upgrading from 3.20.xx! installed-size: 4387 Package: patch Version: 2.5-0bo1 Priority: standard Section: utils Maintainer: Darren Stalder Depends: libc5 (>= 5.4.0-0) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/patch_2.5-0bo1.deb Size: 70144 MD5sum: 2a20dec2dd27720d0e4213963e894312 Description: Apply a diff file to an original Patch will take a patch file containing any of the four forms of difference listing produced by the diff program and apply those differences to an original file, producing a patched version. installed-size: 108 Package: perl Version: 5.004.04-2bo1.1 Priority: important Section: interpreters Maintainer: Darren Stalder Pre-Depends: perl-base (>=5.004.04-2) Depends: perl-base (=5.004.04-2bo1.1) Suggests: perl-suid, perl-debug Conflicts: io Provides: io Replaces: io Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/perl_5.004.04-2bo1.1.deb Size: 2999758 MD5sum: adced8bc91311ea26588c6fd772bc496 Description: Larry Wall's Practical Extracting and Report Language. An interpreted scripting language, known among some as "Unix's Swiss Army Chainsaw". . Perl is optimized for scanning arbitrary text files and system administration. It has built-in extended regular expression matching and replacement, a dataflow mechanism to improve security with setuid scripts and is extendable via modules that can interface to C libraries. . Note that this supplements perl-base, providing the full Perl distribution. installed-size: 6558 Package: perl-base Version: 5.004.04-2bo1.1 Essential: yes Maintainer: Darren Stalder Pre-Depends: ldso (>= 1.8.0-0), libc5 (>= 5.4.0-0), libdb1, libgdbm1 Suggests: perl Replaces: perl Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/perl-base_5.004.04-2bo1.1.deb Size: 476134 MD5sum: e9143a212ec63f3b3034ceea4b7e65f9 Description: The Pathologically Eclectic Rubbish Lister A scripting language with delusions of full language-hood, Perl is used in many system scripts and utilities. . This is a stripped down Perl with only essential libraries. To make full use of Perl, you'll want to install the 'Perl' package which supplements this one. installed-size: 1116 source: perl Package: perl-debug Version: 5.004.04-2bo1.1 Priority: optional Section: interpreters Maintainer: Darren Stalder Depends: perl (=5.004.04-2bo1.1) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/perl-debug_5.004.04-2bo1.1.deb Size: 1308878 MD5sum: 7c581e3c596db0c866febf2e0aba2a17 Description: Allow debugging Perl scripts (and Perl). Truly extensive and exhaustive output is possible with different settings. installed-size: 3988 source: perl Package: perl-suid Version: 5.004.04-2bo1.1 Priority: standard Section: interpreters Maintainer: Darren Stalder Depends: perl (=5.004.04-2bo1.1) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/perl-suid_5.004.04-2bo1.1.deb Size: 235140 MD5sum: 2a4fc48d99304ac06a8124d485537498 Description: Runs setuid Perl scripts. This can be a security hole but it is much safer than shell scripts and with -Tw can be much safer than setuid executables. installed-size: 544 source: perl Package: perl-tk Version: 1:400.202-8bo1.1 Priority: optional Section: interpreters Maintainer: Rob Browning Depends: perl (>=5.004) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/perl-tk_400.202-8bo1.1.deb Size: 1584800 MD5sum: c2f834f295d1c1371cf033df16f15215 Description: Perl module providing the Tk graphics library. A good place to get started is by running the "widget" demo that's installed with this package. installed-size: 4785 Package: perlmenu Version: 4.0-0bo1.1 Maintainer: John Goerzen Depends: perl-curses, perl (>= 5.003) Architecture: all Filename: dists/bo/bo-unstable/binary-i386/perlmenu_4.0-0bo1.1.deb Size: 81710 MD5sum: 2108cf17863a5dce1620ae666ffcdb9d Description: Menu and Template (curses-based) UI for Perl perlmenu is a Perl module that provides your application with access to easy-to-use functions for templates, menus, forms, and the like -- everything needed to put a slick UI on a program without resorting to a GUI. installed-size: 196 Package: perlsgml Version: 1996Oct09-5bo1.1 Priority: optional Section: text Maintainer: Susan G. Kleinmann Depends: perl|perl-base Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/perlsgml_1996Oct09-5bo1.1.deb Size: 81372 MD5sum: b589428f87d7016872f7df0f033fe147 Description: perlSGML is a suite of HTML analysis tools from Earl Hood. dtd2html produces an HTML document starting from an SGML DTD that permits an easy hypertext navigation through the given DTD. . dtddiff compares two DTDs and shows possible differences. . dtdtree shows visually the hierarchical tree structure characterizing the relations between the various elements of a DTD. . dtdview is an interactive program for studying an SGML DTD. . stripsgml strips a text from its SGML markup, and attempts to translate entity references by standard ASCII characters. installed-size: 343 Package: postgresql Version: 6.2.1-11bo1.1 Priority: optional Section: misc Maintainer: Oliver Elphick Depends: ldso (>= 1.8.0-0), libc5 (>= 5.4.0-0), libpgsql, libreadline2 (>= 2.1), ncurses3.0,libpgsql Recommends: postgresql-doc Suggests: libpgperl,libpgjava,libpgtcl Conflicts: postgres95,libpq1 Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/postgresql_6.2.1-11bo1.1.deb Size: 619298 MD5sum: 8f2a13ec4a3f785c6588301e86957f2f Description: Object-relational SQL database, descended from POSTGRES. [WARNING: because of the risk of data loss, this package _conflicts_ with earlier major releases. DO NOT FORCE A REPLACEMENT.] . PostgreSQL is the successor to Postgres95 and ultimately of POSTGRES. It is an object-relational database, which supports a subset of SQL-92 that grows with every release. . The original POSTGRES was developed at Berkeley as a research project and used its own postquel retrieval language, which is now nearly replaced by SQL. installed-size: 1398 Package: postgresql-dev Version: 6.2.1-11bo1.1 Priority: optional Section: devel Maintainer: Oliver Elphick Depends: libpgsql Suggests: postgresql-doc Conflicts: postgres95-dev,postgres95,libpq1 Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/postgresql-dev_6.2.1-11bo1.1.deb Size: 109536 MD5sum: f5c5096c05c5cf8ee6fbe091bf4dcc85 Description: Header files for libpq (postgresql library) Header files for compiling C and C++ programs to link with the libpgsql libraries in order to communicate with the PostgreSQL database backend. installed-size: 283 source: postgresql Package: postgresql-doc Version: 6.2.1-11bo1.1 Priority: optional Section: doc Maintainer: Oliver Elphick Suggests: doc-linux-html Architecture: all Filename: dists/bo/bo-unstable/binary-i386/postgresql-doc_6.2.1-11bo1.1.deb Size: 369292 MD5sum: a1437557e59413f69fa63af8ca0972a2 Description: Documentation for the PostgreSQL database. Contains all README files, user manual and examples for all PostgreSQL packages. . (Although the user manual is useful, it is seriously out of date in parts. A project is underway to remedy this. Sorry...) installed-size: 481 source: postgresql Package: ppp Version: 2.3.5-0bo0.1 Priority: optional Section: net Maintainer: Philip Hands Depends: libc5 (>= 5.4.0-0), netbase Suggests: ppp-pam Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/ppp_2.3.5-0bo0.1.deb Size: 156848 MD5sum: 54c0f3d811b07ca09a4fefb41b41cc7f Description: Point-to-Point Protocol (PPP) daemon. The Point-to-Point Protocol (PPP) provides a standard way to transmit datagrams over a serial link, as well as a standard way for the machines at either end of the link (the "peers") to negotiate various optional characteristics of the link. Using PPP, a serial link can be used to transmit Internet Protocol (IP) datagrams, allowing TCP/IP connections between the peers. installed-size: 308 Package: ppp-pam Version: 2.3.5-0bo0.1 Priority: standard Section: net Maintainer: Philip Hands Depends: ldso (>= 1.8.0-0), libc5 (>= 5.4.0-0), libpam0 (>= 0.56-1), netbase, ppp (=2.3.5-0bo0.1) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/ppp-pam_2.3.5-0bo0.1.deb Size: 52994 MD5sum: b5c40c5914ff37692d813fb397906f81 Description: Point-to-Point Protocol (PPP) daemon with PAM support. This package contains just the pppd binary, with PAM support included . This is excluded from the normal ppp package to save space on the boot disks. You should install this if you have ppp installed installed-size: 116 source: ppp Package: procmail Version: 3.10.7-0bo6 Priority: standard Section: mail Maintainer: Santiago Vila Depends: libc5 (>= 5.4.0-0), debianutils (>= 1.6) Recommends: smail | sendmail | mail-transport-agent | fetchmail Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/procmail_3.10.7-0bo6.deb Size: 118244 MD5sum: 8ceaae2e488c7cdafab8ce3136594abc Description: Versatile e-mail processor. Can be used to create mail-servers, mailing lists, sort your incoming mail into separate folders/files (real convenient when subscribing to one or more mailing lists or for prioritising your mail), preprocess your mail, start any programs upon mail arrival (e.g. to generate different chimes on your workstation for different types of mail) or selectively forward certain incoming mail automatically to someone. . Note: This release is based on procmail-g3.11pre7. installed-size: 215 Package: proftpd Version: 1.0.0-4bo1.1 Priority: optional Section: net Maintainer: Johnie Ingram Depends: netbase (>= 2.0), libc5 (>= 5.4.0-0) Conflicts: wu-ftpd Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/proftpd_1.0.0-4bo1.1.deb Size: 148462 MD5sum: c615cc382dea47674443cfd052a22c64 Description: Versatile, virtual-hosting FTP daemon A powerful replacement for wu-ftpd, this daemon supports hidden directories, virtual hosts, and per-directory ".ftpaccess" files. It uses a single main configuration file, with a syntax similar to Apache. . Because of the advanced design, anonymous-FTP directories can have an arbitrary internal structure (bin, lib, etc, and special files are not needed). . More information can be found at http://www.proftpd.org/. installed-size: 369 Package: qt-dev Version: 1.31-1.4 Priority: optional Section: non-free Maintainer: Heiko Schlittermann Depends: libc-dev, qt1 (>= 1.31-1.4), libc5 (>= 5.4.0-0) Recommends: qt-doc (>= 1.31-1.4) Conflicts: qt0-dev Replaces: qt0-dev Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/qt-dev_1.31-1.4_i386.deb Size: 965026 MD5sum: acc5fb067f8e684820c333e5ad3f32af Description: Environment for QT GUI development. QT is a complete framework for development of GUI, based on a set of C++ classes. The header files, manual pages, and *moc*, qt's own meta object compiler (?) are included as well as a static version of the library. For examples, more (html'd) doc, and a complete tutorial consider installing the qt-doc package. installed-size: 2746 source: qt1 Package: qt-doc Version: 1.31-1.4 Priority: optional Section: non-free Maintainer: Heiko Schlittermann Suggests: qt-dev (>= 1.31-1.4), www-browser Conflicts: qt0-doc Replaces: qt0-doc Architecture: all Filename: dists/bo/bo-unstable/binary-i386/qt-doc_1.31-1.4_all.deb Size: 972890 MD5sum: 24dab015cf1e990a7d429f3187555822 Description: Comprehensive docs (html), examples, and tutorial for QT. QT is a complete framework for development of GUI, based on a set of C++ classes. A rich set of examples, a complete tutorial. installed-size: 4697 source: qt1 Package: qt1 Version: 1.31-1.4 Priority: optional Section: non-free Maintainer: Heiko Schlittermann Depends: xlib6, libc5 (>= 5.4.0-0), xlib6 (>= 3.3-0) Provides: qt Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/qt1_1.31-1.4_i386.deb Size: 417876 MD5sum: 88a8929e8a3ecff239cea2ab2dca81b1 Description: Shared Library used by applications linked with libqt. QT is a library and framework for GUI developement. If you've applications linked against the shared library *libqt* you'll need to install this package. For own development using QT you should install the qt-dev and probably the qt-doc package. installed-size: 1066 Package: qt1-dev Version: 1.33-0bo5.1 Priority: optional Section: non-free Maintainer: Heiko Schlittermann Depends: libc5-dev, qt1 (>= 1.33-0bo5.1), libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1) Recommends: qt-doc (>= 1.33-0bo5.1) Conflicts: qt0-dev, qt-dev Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/qt1-dev_1.33-0bo5.1.deb Size: 978030 MD5sum: ae8bb125e314c96fefbe1f7c86efe78a Description: Environment for QT GUI development. QT is a complete framework for development of GUI, based on a set of C++ classes. The header files, manual pages, and *moc*, qt's own meta object compiler (?) are included as well as a static version of the library. For examples, more (html'd) doc, and a complete tutorial consider installing the qt-doc package. installed-size: 2632 source: qt1 Package: rsync Version: 1.7.1-0bo1 Priority: optional Section: net Maintainer: Philip Hands Depends: libc5 (>= 5.4.0-0) Suggests: ssh Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/rsync_1.7.1-0bo1.deb Size: 55074 MD5sum: 2a5d270eb92095aca38aa46c404ef2cb Description: fast remote file copy program (like rcp) rsync is a program that allows files to be copied to and from remote machines in much the same way as rcp. It has many more options than rcp, and uses the rsync remote-update protocol to greatly speedup file transfers when the destination file already exists. . The rsync remote-update protocol allows rsync to transfer just the differences between two sets of files across the network link. installed-size: 109 Package: smartlist Version: 3.10.7-2bo5 Priority: optional Section: mail Maintainer: Santiago Vila Depends: libc5 (>= 5.4.0-0), procmail, mail-transport-agent Recommends: base-passwd (>= 1.3.0) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/smartlist_3.10.7-2bo5.deb Size: 89512 MD5sum: 1b57b2b6e34e3dc430b590559f790c8f Description: Versatile and Intelligent List Processor SmartList is a mailing list manager built on top of the procmail mail processing package. Some features: * Enough intelligence to overcome the ignorance of some subscribers (will direct subscribe and unsubscribe requests away from the regular list and automatically onto the -request address). * No hardwired format for (un)subscribe requests (i.e. new subscribers need not be educated, unsubscribing users do not need to remember any particular syntax). *Intelligent* autoremoval of addresses from the list that cause too many bounces. * Duplicate submissions are eliminated automatically. * You can set up a mailinglist to function as a standalone mail archive server. . Note: This release is based on smartlist-g3.11pre7. installed-size: 241 Package: staroffice3 Version: 3.1-6bo1.1 Priority: optional Section: contrib Maintainer: Martin Schulze Depends: libc5 (>= 5.4.4-0), xlib6, xpm4.7, libg++27 Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/staroffice3_3.1-6bo1.1.deb Size: 22460 MD5sum: 2607a1f1901e56dc5b24d825a88299b6 Description: Star Office 3.1 installer Star Office 3.1 is a suite of office productivity applications containing the following - StarWriter 3.1 (word processor) - StarCalc 3.1 (spreadsheet) - StarDraw 3.1 (graphics and presentation package) - StarImage 3.1 (image manipulation) - StarChart 3.1 (bar, pie and other charts) - StarMath 3.1 (formula design) . StarOffice 3.1 makes heavy use of common code in shared libraries, therefore using relatively few resources for the level of functionality. . The StarOffice 3.1 binaries can be found in ftp://ftp.gwdg.de/pub/linux/staroffice/ They need to be placed in /tmp or $TMP respectively. installed-size: 62 source: staroffice3-installer Package: tar Version: 1.12-0bo2.1 Priority: required Section: base Essential: yes Maintainer: Bdale Garbee Pre-Depends: libc5 (>= 5.4.0-0) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/tar_1.12-0bo2.1.deb Size: 263270 MD5sum: db799d7744757afce6911aed6f7bc7a2 Description: GNU tar Tar is a program for packaging a set of files as a single archive in tar format. The function it performs is conceptually similar to cpio, and to things like pkzip in the DOS world. It is heavily used by the Debian package management system, and is useful for performing system backups and exchanging sets of files with others. installed-size: 564 Package: tcl80 Version: 8.0p2-0bo1 Priority: optional Section: libs Maintainer: David Engel Depends: libc5 Conflicts: tcl, tcl74 (<=7.4p3-2) Provides: tclsh Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/tcl80_8.0p2-0bo1.deb Size: 292036 MD5sum: 3b934014e28fc8e664c714826dab050e Description: The Tool Command Language (TCL) v8.0 - Run-Time Package. TCL is a powerful, easy to use, interpreted scripting language. installed-size: 637 Package: tcl80-dev Version: 8.0p2-0bo1 Priority: optional Section: devel Maintainer: David Engel Depends: libc5-dev, tcl80 (=8.0p2-0bo1) Conflicts: tcl, tcl-dev Provides: tcl-dev Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/tcl80-dev_8.0p2-0bo1.deb Size: 829842 MD5sum: 2a440779f332db8208570d7fa72a7ef7 Description: The Tool Command Language (TCL) v8.0 - Development Package. TCL is a powerful, easy to use, interpreted scripting language. installed-size: 1285 source: tcl80 Package: tk80 Version: 8.0p2-0bo1.1 Priority: optional Section: libs Maintainer: David Engel Depends: libc5, tcl80, xlib6 Conflicts: tk, tk40 (<=4.0p3-2) Provides: wish Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/tk80_8.0p2-0bo1.1.deb Size: 617920 MD5sum: 12a16b43a1949d5ae48fba2288f26377 Description: The Tk toolkit for TCL and X11 v8.0 - Run-Time Package. Tk is an X11 toolkit that provides the Motif look and feel and is implemented using the Tcl scripting language. installed-size: 1576 Package: tk80-dev Version: 8.0p2-0bo1.1 Priority: optional Section: devel Maintainer: David Engel Depends: libc5-dev, tcl80-dev, xlib6-dev, tk80 (=8.0p2-0bo1.1) Conflicts: tk, tk-dev Provides: tk-dev Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/tk80-dev_8.0p2-0bo1.1.deb Size: 865958 MD5sum: 6657eb3e3a27dce23a64ad05bd63b14c Description: The Tk toolkit for TCL and X11 v8.0 - Development Package. Tk is an X11 toolkit that provides the Motif look and feel and is implemented using the Tcl scripting language. installed-size: 1428 source: tk80 Package: tkirc Version: 1.151-1bo1.1 Priority: optional Section: net Maintainer: Martin Schulze Depends: wish, ircii (>=2.8-1) Architecture: all Filename: dists/bo/bo-unstable/binary-i386/tkirc_1.151-1bo1.1.deb Size: 92034 MD5sum: 9ada95898df5f51c633af47b16724a39 Description: Tcl/Tk based client to the Internet Relay Chat tkirc is a frontend for unix's ircII (shell-client for the Internet Relay Chat) based on Tcl/Tk. installed-size: 316 Package: vlock Version: 1.0-7bo3 Priority: optional Section: utils Maintainer: Juan Cespedes Depends: libc5 (>= 5.4.0-0) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/vlock_1.0-7bo3.deb Size: 10674 MD5sum: dd90a07786edf3bb53d1f49b1d41d027 Description: Virtual Console locking program vlock is a program to lock one or more sessions on the Linux console. This is especially useful for Linux machines which have multiple users with access to the console. One user may lock his or her session(s) while still allowing other users to use the system on other virtual consoles. If desired, the entire console may be locked and virtual console switching disabled. installed-size: 24 Package: word2x Version: 1.5-1bo1 Priority: optional Section: text Maintainer: David N. Welton Depends: libc5 (>= 5.4.0-0), libg++27 (>= 2.7.2.1-1) Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/word2x_1.5-1bo1.deb Size: 29922 MD5sum: cecf7894808e34d3fdb9fa32deb98205 Description: Translates Word files into ascii text or LaTeX Takes Word files and transforms them into ascii text or LaTeX installed-size: 91 Package: wu-ftpd-academ Version: 2.4.2.16-0bo5 Priority: optional Section: net Maintainer: Heiko Schlittermann Depends: libc5 (>= 5.4.0-0), netbase (>= 2.0) Conflicts: wu-ftpd Replaces: wu-ftpd Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/wu-ftpd-academ_2.4.2.16-0bo5.deb Size: 123994 MD5sum: 060e2d5ccb6b20b68cb1f3045206cb99 Description: A powerful replacement for the standard ftpd wu-ftpd is a replacement ftp server for Un*x systems. Besides supporting the ftp protocol defined in RFC 959, it adds the following features: o logging of transfers o logging of commands o on the fly compression and archiving o classification of users on type and location o per class limits o per directory upload permissions o restricted guest accounts o system wide and per directory messages. o directory alias o cdpath o filename filter o virtual host support (similar to the apache httpd server) . This release is maintained by Academ Consulting Services as a public service to the Internet. installed-size: 253 Package: xlockmore Version: 4.06.1-2bo1.1 Priority: optional Section: x11 Maintainer: Dirk Eddelbuettel Depends: libc5 (>= 5.4.0-0), xlib6 (>= 3.3-0) Suggests: fortune Conflicts: xlockmore-gl Replaces: xlockmore-gl Architecture: i386 Filename: dists/bo/bo-unstable/binary-i386/xlockmore_4.06.1-2bo1.1.deb Size: 272956 MD5sum: 30993e688745bfae7bfd8a8cfec80a8b Description: Lock X11 display until password is entered. xlock locks the X server till the user enters his/her password at the keyboard. While xlock is running, all new server connections are refused. The screen saver is disabled. The mouse cursor is turned off. The screen is blanked and a changing pattern is put on the screen. If a key or a mouse button is pressed then the user is prompted for the password of the user who started xlock. xlockmore extends the standard xlock program by adding many more modes that are highly configurable. . Note that under XFree86, the X11 implementation for Linux, Control- Alt-Backspace will defeat the locking mechanism and return your console back unless you put "DontZap" in your XF86Config file. 'xdm' returns to the login prompt. Control-Alt-F1 (among others) will defeat locking mechanism with virtual terminals, so make sure that you are not logged onto any virtual consoles. . This version is built without additional OpenGL/MesaGL and XPM modes. The companion package xlockmore-gl does contain them. installed-size: 599